ADA Compliance Curb Ramp

ADA Compliance Curb Ramp Correction in Progress:

Counter Slope. Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20. The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level.

Sides of Curb Ramps. Where provided, curb ramp flares shall not be steeper than 1:10.

Landings. Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum. The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing.

Location. Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles. Curb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides.

 

Curb Ramp Flare Slope Correction
Curb Ramp Flare Slope Correction
Curb Ramp Flare Slope Correction
Curb Ramp Flare Slope Correction
Curb Ramp Slope Correction
Curb Ramp Slope Correction

 

 

 

 

 

Prestige Construction Company is an ADA Compliance Contractor

See Corrected ADA Compliant concrete Curb Ramp

ADA Compliant Concrete Ramp
ADA Compliant Concrete Curb Ramp

Leave a Reply

Your email address will not be published. Required fields are marked *